.png){kind=small}
Draw It See It 3D
The 2D drawing engine builds a countertop live from a centerline, with edges, corners, cutouts, splash and waterfall, then the real slab lands on it in vein-matched 3D.
Open video ↗SlabOS turns the countertop drawing into a furnished presentation. Automatic assembly builds the stone arrangement, while Furnish this counter fits missing cabinets, sinks and cooktops to the selected countertop. A supported appliance opening can receive a slide-in range, with an optional hood above a cooktop or range. Preview the result, apply it and customize the individual items. Real slab imagery, 3D room presentation and customer AR build on the same quoted design.
Assemble and furnish a countertop in 3D (beta)
A drawn L-shaped countertop goes through the SlabOS 3D Builder Studio (beta): preview the stone assembly at 36 inches, run Furnish this counter to preview fitted cabinets, sink, cooktop and toe-kick lights, change the cabinet finish, then apply the arrangement.
Read the clip: text and visual description
SlabOS: Assemble and Furnish the Kitchen (36 seconds, no voiceover; music and sound effects only)
A drawing isn't a kitchen. A glowing plan drawing of an L-shaped countertop appears, 144 inches along the back wall and 96 inches on the return, with a sink opening and a cooktop opening.
3D Builder Studio (beta). The drawn top. The camera tilts into a 3D room view and the real slab fills the top, labeled CT1, one L-shaped top, with sink and cooktop openings.
Preview the assembly. On the Stone tab, the Preview assembly control is clicked. A wireframe ghost of the top appears at counter height, with the note "CT1 top 36 inches above floor" and "Preview every change before applying." The Apply & furnish control is clicked and the stone rises into place. Raised to 36 inches.
Furnish this counter. The view switches to the Furnish tab and the Preview furnishing control is clicked. 8 fitted cabinets grow in as a striped preview, facing the inside corner. A "Will add" counter climbs from 1 to 8. Sink and cooktop drop into their openings, fitted to the CT1 openings, and the counter reaches 10. Toe-kick LEDs: 2 warm toe-kick LED strips light up along the cabinet fronts, and the counter reaches 12.
Change the finish. The Cabinet finish selector changes from Natural oak to Charcoal, and the cabinet fronts change from light to dark one by one.
Apply furnishing. The Apply furnishing control is clicked and the preview turns solid. Added 12. Undo restores the previous arrangement.
The whole kitchen, around their stone. Every item stays customizable. The camera settles on the finished kitchen: the stone top with its sink and gas cooktop, 8 cabinets with drawer and door fronts, and glowing toe-kick lights.
End card: the SlabOS logo assembles. SlabOS. Draw the top. Furnish the kitchen. 3D Builder Studio, beta. slabos.com. Book a demo.
3D Builder Studio is in beta and is enabled per shop.
Inputs this workflow uses
The countertop drawing and assembly, recorded fixture openings, appliance gaps and selected cabinet style and finish.
Outputs to evaluate
An editable 3D presentation with fitted cabinetry, supported fixtures and appliances, ready for refinement and customer presentation.
A representative demonstration
Start with an island containing a sink opening and a run with an appliance gap. Show the proposed furnishings, apply them, customize the finish and publish the intended customer presentation.
Bring a representative job to a SlabOS demo and see how this capability fits your shop’s work.
Scope and availability
Automatic furnishing follows the selected countertop and supported openings. Items stay editable, existing placements are preserved and the preview is applied only after review. The upgraded 3D experience must be enabled for the shop.
Product context and useful resources
- Automatic 3D & kitchen furnishing
See automatic stone assembly and fitted cabinets, sinks, cooktops and supported appliances in the latest SlabOS 3D workflow.
- 3D & AR Showcase
See how countertop geometry, material appearance and the customer presentation connect.
- CAD & Laser Templating
Explore exact geometry, drawing revisions and templating handoffs alongside this workflow.
- Customer Portal
See the customer-facing drawing, document and project experience.
Related workflow articles and reports
- 3D and AR in the customer’s kitchen
- Automatic nesting on real inventory
- DXF import and laser-template handoff
- Seams, edges and splash as geometry
A shop owner’s first impression
“I'd sell that.”
Reacting to a demonstration of SlabOS’s 3D countertop presentation and customer portal.
SLABOS IN MOTION 02 FILMS
SEE THE WORKFLOW.IN MORE DETAIL.
A closer look at the decisions, details and handoffs that make the work happen.
Set the vein match in 3D Builder Studio — beta
Move a piece across the slab photo, mirror a slab for a bookmatch, inspect the seam in Joint Cam and lock the selected layout. 3D Builder Studio is in beta. Review the slab image and final layout before fabrication.
Open video ↗Choose a film to play Explore the collection →