Native Sales app coming soon
One tap.
Another perspective.
Bring a saved countertop drawing into the conversation. Open View in 3D from the quote, turn the model and look at the layout from another angle while keeping the same quote in hand.
One tap. Another perspective.
Open View in 3D from a saved quote drawing, rotate the countertop and pinch to zoom. Return to Edit drawing when the design needs to change.
Read the film: text & visual description
SlabOS Sales: One Tap 3D (SlabOS-Sales-One-Tap-3D-v2), 29.6 s, 1920x1080, 30 fps
Transcript of every on-screen message and the meaningful visuals. Original synthesized score with UI sound cues; no voice-over.
00:00.0-00:03.7 On screen: "SLABOS SALES" / "THE QUOTE." Lit from the first frame. On the right is a large stylised wireframe phone showing a SlabOS Sales quote sheet. A sticky header has a round X, the quote number "Q-1048" and a "Board" button. Below it: "Harbor Kitchen Island", "Ridgeview Remodel Co.", the total "$8,460", a "MOBILE" tag and a "SENT" status pill, then the "CUSTOMER" block with "Lena Marsh" and "555-0147 · lena@ridgeviewremod…".
00:03.7-00:04.7 The phone glides to centre and grows until the quote's two-button row fills the frame.
00:04.7-00:06.9 On screen (quote sheet): the Customer card with CALL / TEXT / EMAIL above the button pair "EDIT DRAWING" | "VIEW IN 3D", and "SEND" with Preview / Download / Link below (shown as PREVIEW / DOWNLOAD / LINK, each with its icon: eye, download arrow, chain link). A fingertip ring taps "VIEW IN 3D" at 00:06.4.
00:06.9-00:07.6 The phone screen fills near-black and the camera passes through it into the full-screen 3D view.
00:07.4-00:08.8 On screen: round X button, "3D VIEW", "Harbor Kitchen Island · Q-1048". Centre: "Loading the quote…"
00:08.7-00:12.3 The saved countertops glow in: an L-shaped top with a sink cut-out through it and a separate island, with two backsplash panels standing at the walls. The model is slowly auto-rotating. Piece badges "CT1" and "CT2" float over the two pieces; the backsplash panels carry no badge. Top-left: camera chips "¾" (lit), "FRONT", "TOP", "SIDE" and a pause button.
On screen: "FROM A SAVED QUOTE DRAWING" / "ONE TAP." / "ANOTHER PERSPECTIVE."
00:12.3-00:15.6 On screen: "Drag to spin · pinch to zoom". A fingertip drags across the model and it orbits (00:12.5-00:13.9). Two fingertips pinch outward over the sink and the view zooms in to the cut-out hole (00:14.1-00:15.5).
00:16.1-00:18.4 The fingertip taps "TOP". The TOP chip lights, the ¾ chip goes neutral, the camera flies overhead to a plan view of the L and the island, and auto-rotate pauses: the pause icon changes to the circular-arrow icon.
00:18.4-00:19.3 The fingertip taps the round X. The view pulls back out of the phone onto the same quote sheet, at the EDIT DRAWING | VIEW IN 3D row.
00:19.6-00:20.8 On screen: "NEED A CHANGE?" A highlight frame slides from "VIEW IN 3D" to "EDIT DRAWING", and the fingertip taps "EDIT DRAWING" at 00:20.6.
00:20.8-00:23.7 The quote editor in the phone. On screen: "ESTIMATE: Harbor Kitchen Island" and the buttons Undo, Redo, Revisions, Preview, Save, Exit. Below them is the icon-only five-step bar (pencil active, then sparkles, scissors, palette, calculator) and the canvas with the L and island drawing.
00:24.1-00:26.4 On screen: "SAVE THE DRAWING." / "TAP VIEW IN 3D."
00:26.4-00:29.6 End card, held to the last frame: the extruded SlabOS mark settles. On screen: "SLABOS SALES" / "NATIVE APP COMING SOON" / "slabos.com/sales-app".
Start with the quote
The drawing is already there.
Open the quote in SlabOS Sales and choose View in 3D. The view uses the quote’s saved drawing. Keep the work saved before presenting so the countertop geometry you show belongs to the quote you are discussing.
- Start from an existing quote with a saved drawing.
- Keep the quote number in context.
- Use Edit drawing when the design needs to change.
Show the shape
Turn it. Zoom in. Explain it.
Drag to orbit the countertop, pinch to zoom and switch between the available camera views. A top view helps explain the plan; another angle helps make the return, island, backsplash and cutouts easier to discuss. These controls change the view, not the dimensions of the saved design.
- Rotate the model to explain its shape.
- Zoom toward the detail being discussed.
- Choose a camera view that suits the conversation.
Keep the handoff clear
Back to the same quote.
Close the viewer to return to the quote. Editing remains a separate action. Sharing the customer quote link is also separate from opening the salesperson’s 3D view; the customer’s published 3D experience depends on what has been published for that project.
- The Sales viewer is read-only.
- Return to Edit drawing for geometry changes.
- A customer quote link is not a shared 3D model file.
Questions about Sales 3D Preview
Can I change the countertop in View in 3D?
View in 3D is a presentation view. Return to the quote and choose Edit drawing to change the design.
What does the 3D view use?
It opens the saved quote drawing. Save the drawing before presenting changes.
Does opening Sales 3D publish it to the customer?
No. The salesperson’s viewer and the customer’s published 3D experience are separate. Customer 3D must be published through the appropriate project workflow.
Is the native Sales app available yet?
The native Sales app is coming soon. The authenticated SlabOS Sales web workspace is available to users with appropriate shop access.
See it in your shop
One workflow.
Part of the whole shop.
Walk through the details with our team.
Book a demo ↗Published by SlabOS · Workflow documentation reviewed October 7, 2026.